Toilet repair & replacement Services in Houston

toilet installation

If you're looking to upgrade your toilet or need a new one installed, it's essential to have a professional handle the job. At Red One Plumbing, we offer comprehensive toilet installation services, including selecting the right toilet for your needs, removing your old toilet, and installing the new one.

We'll make sure your new toilet is installed correctly, ensuring reliable performance and long-lasting durability.

• Fill valve: The fill valve is responsible for filling the tank with water after each flush. It is usually located on the left side of the tank.
• Gasket: Allows water to flow into the bowl when flushed.
• Water supply line: The supply line is a plumbing component that connects the tank to the water supply. It is typically made of flexible plastic or copper tubing and is responsible for delivering water to the toilet tank for flushing and refilling.
• Wax ring: The wax ring is a seal that sits between the bowl and the drain pipe. It helps to prevent leaks and odors from escaping into the bathroom.
• Flush lever: The flush handle is the lever or button that you push to flush the toilet. It is usually located on the front or side of the tank.

• Flush valve: The toilet flush valve is the mechanism that controls the flow of water from the toilet tank to the bowl when you flush the toilet.
• Tank bolts: Tank bolts are the bolts that attach the tank to the bowl. They are usually located on the underside of the tank and extend through the mounting holes on the toilet bowl.
• Flapper: The flapper is a rubber or plastic valve that sits at the bottom of the tank. It is lifted when you flush the toilet, allowing water to flow into the bowl.
• Toilet bolts: Toilet flange bolts are the bolts that are used to secure the toilet flange to the floor and hold the toilet in place.
• Toilet flange: The toilet flange, also known as a closet flange, is a plumbing component that is installed on the floor and connects the toilet to the waste pipe. It is a circular, flat piece that has a raised rim around the outside and a collar that extends vertically into the waste pipe.

8 Signs Your Toilet Needs to Be Replaced

Your toilet is an essential part of your home's plumbing system, and while it may seem like a durable fixture, it may eventually need to be replaced. Here are 8 signs that it's time to replace your toilet:

1. Age: If your toilet is more than 20 years old, it may be time to consider a replacement. Old toilets can be inefficient and may require frequent repairs.
2. Cracks: If you notice cracks in the toilet bowl or tank, it's time for a replacement. Cracks can cause leaks and potentially cause water damage to your home.
3. Constant Repairs: If you find yourself constantly repairing your toilet, it may be more cost-effective to replace it with a new one.
4. Water Leaks: If your toilet is leaking water, it's a clear indication that it's time for a replacement. A leaking toilet can lead to increased water bills and potential water damage.
5. Weak Flushing: If your toilet has a weak flushing power, it may be time for a replacement. This can be a sign of a clog or a problem with the toilet's internal mechanisms.
6. Wobbling: A toilet that wobbles or rocks when you sit on it can be a sign of a damaged flange or an uneven floor. It's best to replace the toilet before it causes more significant damage.
7. Outdated Design: If you're looking to update your bathroom's aesthetics, replacing your toilet with a newer model can be a simple and effective way to achieve a fresh look.
8. Reduced Water Consumption: If you're looking to reduce your water consumption, replacing your old toilet with a low-flow or dual-flush model can help you save water and lower your water bills.

If you notice any of these signs, it's best to consult with a professional plumber to determine the best course of action. A skilled plumber can help you choose the right toilet for your needs and install it properly, ensuring that your new toilet will function properly for years to come.

What is the average lifespan of a toilet?

The average lifespan of a toilet can vary depending on various factors such as usage, quality, and maintenance. However, on average, a toilet can last anywhere from 10 to 20 years. A well-maintained toilet can last longer than a poorly maintained one. Regular maintenance such as cleaning, inspections, and repairs can help extend the lifespan of a toilet.

Additionally, the quality of the toilet and its components can also affect its lifespan. High-quality toilets with durable components may last longer than lower quality ones. If you're unsure about the lifespan of your toilet, it's best to consult with a professional plumber for an evaluation.

How much does it cost to replace a toilet?

The cost to replace a toilet can vary depending on several factors, such as the type of toilet, the complexity of the installation, and your location. On average, the cost to replace a toilet can range from $150 to $800.

A basic toilet without any additional features can cost around $150 to $250, while a more high-end toilet with additional features like heated seats, bidet functionality, or water-saving features can cost upwards of $500 or more.

In addition to the cost of the toilet, installation costs can also vary depending on the complexity of the installation. Factors like the condition of your plumbing, the location of your bathroom, and the type of toilet being installed can affect the cost of installation.

how to replace a toilet

Replacing a toilet is a job that can be done with a few basic tools and some DIY skills. Here are the general steps to replace a toilet:

1. Turn off the water supply: Turn off the water supply valve that is located behind the toilet.
2. Empty the tank and bowl: Flush the toilet and hold down the handle to remove as much water as possible from the tank and bowl. Use a plunger to force any remaining water out of the bowl.
3. Disconnect the water supply line: Use an adjustable wrench to disconnect the water supply line from the bottom of the tank.
4. Remove the toilet: Remove the nuts and washers that secure the toilet to the floor bolts. Lift the toilet off the flange and place it on its side on a towel or drop cloth.
5. Remove the wax ring: Use a putty knife to scrape away the wax ring that seals the toilet to the flange. Be careful not to damage the flange.
6. Install the new wax ring: Place a new wax ring onto the flange with the plastic horn facing up.
7. Install the new toilet: Lift the new toilet onto the flange and align the bolt holes with the floor bolts. Gently press the toilet down onto the wax ring until it is seated firmly on the floor. Install the nuts and washers onto the floor bolts and tighten them evenly.
8. Reconnect the water supply line: Reconnect the water supply line to the bottom of the tank and turn on the water supply valve.
9. Test the toilet: Flush the toilet and check for any leaks around the base and the water supply line.

how to choose the best toilet for my home

Choosing the best toilet for your home can be a subjective decision, but here are some factors to consider when making your choice:

1. Size and shape: Toilets come in different sizes and shapes, so it's important to choose one that fits your bathroom and your needs. Measure the available space in your bathroom and choose a toilet that will fit comfortably.
2. Flushing system: Look for a toilet with an efficient flushing system that can effectively remove waste without using too much water. Options include gravity-fed toilets, pressure-assisted toilets, and dual-flush toilets.
3. Water efficiency: Choose a toilet with a low-flow option to save water and reduce your utility bills. Look for models that are EPA WaterSense certified, which means they use 1.28 gallons per flush or less.
4. Comfort: Consider the height, shape, and style of the toilet bowl to ensure it is comfortable for your needs. Options include standard-height, comfort-height, round, and elongated bowls.
5. Durability: Look for a toilet made from high-quality materials that can withstand frequent use and last for years.
6. Maintenance: Choose a toilet with a smooth surface that is easy to clean and maintain. Some models come with features like self-cleaning bowls or easy-to-remove seats for easier maintenance.

How to Unclog a Toilet?

Here are some steps to follow to unclog a toilet:

1. Turn off the water supply: The first step is to turn off the water supply to the toilet to prevent any overflowing. You can usually find the shut-off valve located behind the toilet.
2. Prepare the area: To avoid any mess, lay some towels or newspapers on the floor around the toilet.
3. Use a plunger: A plunger is a useful tool to unclog a toilet. Place the plunger over the drain and ensure it creates a seal. Then, push and pull the plunger vigorously up and down, which will create suction and push the blockage through the drain. Repeat this process several times until the clog is cleared.
4. Try a toilet auger: If the plunger doesn't work, you can try using a toilet auger, also known as a plumbing snake. Insert the end of the auger into the toilet bowl, and turn the handle clockwise to loosen the blockage. Keep turning the handle until the blockage is cleared.
5. Clean up: Once the clog is cleared, turn the water supply back on, and flush the toilet to ensure it's working correctly. Clean up any mess and dispose of any used materials.

how to fix a running toilet

A running toilet is a common plumbing problem that can be caused by various issues. Here are the general steps to fix a running toilet:

1. Check the flapper: The flapper is a rubber valve that controls the flow of water from the tank to the bowl. If it is worn or damaged, water may leak through and cause the toilet to run. Check the flapper and make sure it is sealing properly. If it is not, replace it with a new one.
2. Check the fill valve: The fill valve is the mechanism that fills the toilet tank with water. If it is not working properly, it can cause the toilet to run. Check the valve and make sure it is clean and functioning correctly. If not, replace it with a new one.
3. Check the chain: The chain that connects the flapper to the toilet handle can sometimes be too loose or too tight, causing the toilet to run. Adjust the chain so that it has just enough slack to allow the flapper to close properly.
4. Check the water level: If the water level in the tank is too high, it can cause the water to run continuously. Adjust the water level so that it is below the overflow tube.
5. Check for leaks: Check for leaks around the base of the toilet, the water supply line, and the tank bolts. If there is a leak, tighten the bolts or replace any damaged components.

If these steps do not fix the running toilet, it may be necessary to call a plumber to diagnose and repair the issue.

Look for licensed and insured plumbers: A licensed and insured plumber ensures that the plumber is qualified to perform the repairs and that any damages or accidents that occur during the repair process are covered.

Check for experience: Choose a plumber who has experience in toilet repair services. An experienced plumber is more likely to have encountered a wide range of toilet problems and will be able to diagnose and fix the issue quickly.

Ask for referrals: Ask family, friends, and neighbors for referrals to plumbers they have used in the past. This can help you find a trusted and reliable plumber who has a proven track record.

Check reviews and ratings: Look for reviews and ratings of plumbers online. Check websites such as Google, Yelp, and Angie's List for reviews from previous customers.Get quotes: Get quotes from multiple plumbers to compare prices and services.

Get quotes: Get quotes from multiple plumbers to compare prices and services. Choose a plumber who provides a detailed quote that includes all the services and fees.

Check for emergency services: Choose a plumber who provides emergency services in case of a toilet repair emergency outside regular business hours.